This is the 1/10 scale electric powered, radio controlled, Hot Bodies Cyclone On-Road Touring Car.

FEATURES:
Chassis: Woven graphite 1/8" (3mm) thick, woven graphite upper and middle deck and shock towers
Drive: Four wheel belt drive
Ball bearings: full set
Shocks: Four oil filled aluminum threaded bodies
Gearbox: Open front and rear
Differentials: Front one-way, rear carbide ball diff
Swaybars: 1.4mm front and rear bars
Bumper: Front foam
Suspension: Adjustable
Wheelbase: Adjustable from 10.1"-10.2" (256mm-259mm)
Camber Tie Rods: Adjustable front and rear, camber refers to the angle of the tops of the tires from vertical when when viewed from front or behind vehicle

Caster: Adjustable front and rear, caster/toe-in refers to the angle of the suspension when viewed from the side of the car in relation to the chassis

Ackerman: Adjustable, Ackerman describes the effect of the inside front wheel turning tighter than the outside front wheel Roll Center, Ride Height and Down Stops: Adjustable front and rear Bump Steer, Anti-Dive/Kick-Up: Adjustable

Steering: Ball bearing supported, single bellcrank
Servo Saver: Spring loaded, incorporated into steering bellcrank

INCLUDES:
Hot Bodies Cyclone Touring Car with four oil-filled shocks, 100t 64 pitch spur gear, ball bearings, carbon fiber chassis, shock towers foam front bumper, aluminum pivot blocks, titanium turnbuckles

REQUIRES:
Radio: 2-Channel with 2 Servos
Radio Batteries: (8) AA size
Speed Control: Electronic of modeler's choice
Motor: Modeler's choice
Body: 190mm width
Wheels:24mm width, but modeler's choice
Tires: 24mm width, but modeler's choice
Pinion: Modeler's choice
Battery: 6 cell side by side configuration
Charger: AC/DC timed or peak for battery
Paint: For polycorbonate body
Misc. Items: Building and track equipment

SPECS:
VEHICLE-
Length: 14.4" (365mm)
Width: 7.5" (190mm)
Weight: 3.15lbs (1430g) with motor, battery and electronics
Wheelbase: Adjustable from 10.1"-10.2" (256mm-259mm)
Drive Ratio: 2.4375:1

COMMENTS:
For Replacement Ball Bearings use:
Qty. Size Location Bearing Set Qty.
4 10mm X 15mm Outdrives DTXC1595 X 2
2 4mm X 8mm Differential DTXC1511 X 1
8 5mm x 10mm Hub Carriers DTXC1535 X 4
2 4mm x 7mm Bellcrank DTXC1507 X 1
1 5mm x 8mm Differential DTXC1523 X 1